Reflective Vest

Reflective Vest

1101 rdp – Security safety vest with reflective stripes.
Length: 69cm
Waist: 63cm
Weight: 150g

Vest Keselamatan
Safety Vest with High Quality 3M standard reflective panel, rust-free zip design.
Suitable for PDRM Police, Bomba, Keselamatan Community Policing & RELA.

Best Reflective Safety Vest


JPJ PDRM Polis Malaysia. Also for car park securities, biking, cycling, running competition Rela Vest.

What is the difference for Class 1, Class 2 and Class 3 Safety Vests?

At work, in order to avoid unfortunate accidents, must be highly visible reflective vest. One of the ways OSHA is committed to protecting the staff of potentially hazardous substances is to require workers to wear vests approved by the American National Standards Institute or ANSI. These mirrorlike vests are designed for workers’ safety and comfort to protect workers and consumers.

A safety vest is suitable for staff in low-impact areas with a traffic flow of no more than 25 miles per hour and the distance from the location. Parking attendants, pick-up drivers, sidewalks or roadside maintenance personnel are examples of work that qualifies for Class 1 security vests. These vests should have a 155-inch mandatory reflective tape. The size of the reflective tape can be 6.46 linear feet of 2 inch tape or 9.39 linear feet of 1 3/8 inch tape. Reflected stripes should be in the middle of the 360 ​​º stripes and above each shoulder. Vest should be safe for yellow or safe orange.

Workers involved in busy traffic must wear a Class 2 garment. Workers who ask for work in bad weather also need a more reflective 2-level security reflective vest. Class 2 vest with a diameter of 2 inches is at least 201 square inches of reflective tape. The reflector can be a size of 8.373 linear feet of 2 inch tape or 12.2 linear feet of 1 3/3 inch tape. Examples of work that require two types of vests are airport baggage and ground crews, forestry workers, large numbers of parking lots or toll stations and law enforcement officers. Reflected stripes will be on top of the shoulders and in the middle of one or two 360º horizontal stripes.

The most obvious job for workers is to keep people in close contact with the traffic. High-risk work includes accident site investigators, emergency personnel, railway workers, utility staff, and investigators and reporting personnel. These workers tend to approach more than 50 miles per hour of transport, so it is important that they see as much as possible. Class 3 safety vests and clothing must have at least 310 square inches of reflective tape for 12.92 linear feet and 2 inches thick. Class 3 clothing also offers more arms and legs than Grade 1 and Level 2 safety vests.

Make sure you are wearing the right safety vest for your work is important. Avoiding unnecessary accidents and keeping employees safe is the goal of ANSI and OSHA. Always make sure to wear a reflective safety vest, as can be seen by the driver, can make sure no accident prone to work area to ensure maximum safety.